 |
|
 |
|
▣ ENDLESS BELT
R/R ENDLESS BELT
|
|
|
Endless Belt WK-80
R/R Endless Belt YK-100 |
CHARACTERISTICS
|
|
These belts are made of seamless thick hollow-weave cotton cloth (no-joint). This "seamless" characteristic gives you smooth grinding without being affected by bumps at the joint point of regular belt.
|
|
SPECIFICATIONS
| Product Name |
Endless Belt |
R/R Endless Belt |
| Type |
WK |
YK |
| Backing |
Hollow-weave cotton cloth |
| Abrasive |
A (Aluminium oxide) |
| Bond |
G/G (Glue bond) |
R/R (Resin bond) |
STANDARD SIZE
100mm (W) x 915mm (L), 100mm (W) x 1525mm (L)
* Standard size belts : 10 pcs./box
* Products with other width (Maximum with : 400mm)
can be produced at you request.
|
| < Available Grit Size > |
 |
| |
#24 |
#30 |
#36 |
#40 |
#50 |
#60 |
#80 |
#100 |
#120 |
#150 |
#180 |
#220 |
#240 |
#280 |
| WK |
|
? |
? |
 |
|
|
|
|
|
|
|
|
|
? |
| YK |
? |
? |
? |
|
|
|
|
|
|
|
|
? |
|
? |
| |
#320 |
#400 |
#600 |
#800 |
#1000 |
|
|
|
|
|
|
|
|
|
| WK |
|
|
|
? |
? |
|
|
|
|
|
|
|
|
|
| YK |
|
|
? |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ??…only in size of 100mm x 915mm |
|
*EAK
For grinding of steel, stainless steel, and general metals
EAK-240 100×915C
*EAN
For aluminum, no clogging (For dry use)
EAN-80 100×915C
*GAK
For heavy grinding of steel, stainless steel, and general metals the most popular type of belt (For both wet and dry use)
GAK-40 100×915C
*SAK
For light grinding of steel, stainless steel, and general metals flexible.
SAK-240 75×3350K
*JWK
For curved surfaces of wood work, aluminum, stainless steel,and iron (Dry use only)
JWK-100 50×3350K
*JCK
For water faucet / brass. (For dry use)
JCK-120 100×2100C
|
CHARACTERISTICS
|
| It shows excellent grinding ability toward any kind of metal (jointed belt) |
|
SPECIFICATIONS
| Product Name |
R/R Abrasive Belt |
| Type |
GAK,EAK,
EAN,SAK |
JWK |
JCK |
| Backing |
Twilled cotton cloth |
| Abrasive |
A
(Aluminium oxide) |
WA
(White alumina) |
C
(Silicon carbide) |
| Bond |
R/R (Resin bond) |
Available Size
Your designated width(mm) x length(mm) (e.g. 75mm x 3350mm)
*standard sizes : 10 pcs./box
Joint Type
Please choose a joint type.
*The most polular type is D-joint.
|
| < Available Grit Size > |
|
| |
#40 |
#50 |
#60 |
#80 |
#100 |
#120 |
#150 |
#180 |
#220 |
#240 |
#280 |
#320 |
#400 |
#500 |
#600 |
| GAK |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| EAK |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| EAN |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| SAK |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| JWK |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| JCK |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
YWK-100 100×610K |
CHARACTERISTICS
|
| Suitable for wood work from its rough polish to finish. |
|
SPECIFICATIONS
| Product Name |
R/G Abrasive Belt |
| Type |
YWK |
| Backing |
Twilled cotton cloth |
| Abrasive |
WA (White alumina) |
| Bond |
R/G (Resin over glue bond) |
Standard Size
Your designated width(mm) x length(mm)
Joint Type
D -Joint, C-Joint, K-Joint (Please disignate a joint type)
|
| #40 |
#60 |
#80 |
#100 |
#120 |
#150 |
#180 |
#240 |
#280 |
#320 |
#400 |
|
|
|
|
|
|
|
|
|
|
|
EZK-80 100×915C
GZK-80 100×915D
|
CHARACTERISTICS
|
Its cutting power, durability, and flexibility will surely increase your work efficiency.
*GZK For heavy duty grinding of metal or wood work for both wet and dry use.
*EZK For heavy dury grinding of any kind of metal work with curved surfaces such as diecast or golf head.
|
|
SPECIFICATIONS
| Product Name |
Zirconia Belt Z-Man |
| Type |
GZK, EZK |
| Backing |
Twilled cotton-polyester mix cloth |
| Abrasive |
AZ (Alumina zirconia) |
| Bond |
R / R (Resin bond) |
Standard Size
100mm x 915mm, 50mm x 3350mm,
75mm x 3350mm
Your designated width and length also available
Available Joint Type
D -Joint, C-Joint, K-Joint, W-Joint
|
| |
#24 |
#30 |
#40 |
#60 |
#80 |
#100 |
#120 |
| GZK |
|
|
|
|
|
|
|
| EZK |
|
|
|
|
|
|
|
GCZ, BTZ
|
CHARACTERISTICS
|
| Abrasives are fixed on the surface of cork grains, so its fine finish lasts equally till the very end. good durability. can be used in both wet and dry method. * BTZ(tripoli powder is applied) is specially designed for glass lustering
|
|
SPECIFICATIONS
| Product Name |
Cork Abrasive Belt |
| Type |
GCZ |
BTZ |
| Backing |
Twilled cotton-polyester mix cloth |
| Abrasive |
C (Silicon carbide) |
Tripoli (Silica) |
| Bond |
R/R (Resin bond) |
Available Size
Your designated width (mm) x Length (mm)
(e.g. 100mm x 915mm)
Applications
Best for finishing of wide range of metal such as carbon steel, stainless steel, or aluminium alloy. use it for finishing after R/R belt grinding (#180-240)
Joint Type
K-Joint is the most popular one.
Caution
Dressing is needed when using a brand-new cork belt
|
| |
#100 |
#120 |
#150 |
#180 |
#240 |
#320 |
#400 |
#600 |
Tripoli |
| GCZ |
|
|
|
|
|
|
|
|
|
| BTZ |
|
|
|
|
|
|
|
|
|
 |
CHARACTERISTICS
|
|
5 mm thick felt is sticked to backing cloth of abrasive belt. it can be used with buffing and polishing compounds (e.g. K-1 green rouge) for lustering of various materials such as metal or plastic.
Combining with different kinds of buffing and polishing compounds, various uses can be obtained.
|
|
SPECIFICATIONS
| Product Name |
Felt Belt (R28W) |
| Backing |
Twilled cotton-polyester mix cloth / felt |
STANDARD SIZE
Your designated width (mm) x Length (mm)
JOINT TYPE
K-Joint
|
|
 |
